产品名称
Products descryiption 长半径和短半径弯头，三通，四通，异径管，管帽，翻边，弯管。
LR & SR Elbow,Tee,Cross,Reducer,Cap,Stub end,Bend
产品规格
Products range DN15-DN3000 无缝和焊接
DN15-DN3000 Seamless and welded
压力标准
Pressure rate Sch5s-Sch160
制造标准
Manufacturing standard GB/T12459,GB/T13401,SH3408/3409,HG/T21635/21631,SY/T0510,ASME B16.9/B16.49,JIS2312/2313,
DIN2605/2615/2616/2617,EN10253
不锈钢
Stainless steel 0Cr18Ni9,00Cr19Ni10,0Cr25Ni20,0Cr18Ni10Ti,00Cr17Ni14Mo2,304/304L,316/316L,321,321H,317L,904L,
1.4541,1.4571,1.4301,1.4404
双相/超级双相钢
Duplex & Super Duplex ASTM A815 UNS31803(2205/00Cr22Ni5Mo3)、UNS32750(2507、00Cr25Ni7Mo4N);UNS32760
碳钢
Carbon steel Q235B,20#,16Mn,16MnR,A234 WPB,WPL3/L6/L9,WPHY42/46/52/56/60/65/65/70
合金钢
Alloy steel 12CrMo,12CrMoV,15CrMo910,WP1,WP5,WP9,WP11,WP22,WP91
其他
Other 铜镍合金，钛材，铝、蒙乃尔，哈氏合金，镍基合金等其他特殊材料
Copper-NicKLMe Alloy,Titanium,Aluminum,Monel,lnconel,Hastelloy and other special material
Standard: GB/T, JB, SH, HG, ANSI ,JIS, DIN
pipes fittings
Material: 234-WPB, A420-WPL6, A234-WP12, A234-WP11, A234-WP5, A403-WP304, A403-WP304L, A403-WP316, A403-WP316L,
SIZE: 1/2"-48"、DN15-DN1200
Pressure: Sch5-Sch160、XXS
Standards:ISO, ANSI, JIS, DIN, GB T12459, GB/T13401, ASME B16.9, SH3408, SH3409,HG/T21635, HG/T21631, SY/T0501
Typical applications: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc.
Flange
ASME B16.5 Standard pipes Flanges up to and including 24 inches nominal
ASME B16.47 Standard pipes Flanges above 24 inches
The gasket type and bolt type are generally specified by the standard(s); however, sometimes the standards refer to the ASME Boiler and Pressure Vessel Code (B&PVC) for details (see ASME Code Section VIII Division 1 - Appendix 2). These flanges are recognized by ASME pipes Codes such as ASME B31.1 Power, and ASME B31.3 Process Piping.
Materials for flanges are usually under ASMEdesignation: SA-105 (Specification for Carbon Steel Forgings for Piping Applications) , SA-266 (Specification for Carbon Steel Forgings for Pressure Vessel Components) or SA-182 (Specification for Forged or Rolled Alloy-Steel pipes Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service).
1. Type: welding neck flange, lap joint flange, thread flange, slip on flange, blind flange
2. Material: carbon steel, stainless steel and alloy steel
3.Standard: ANSI, JIS, BS, DIN,UNI, EN, GB, AWWA, API, MSS, LWN, Orifice, 8-Figure flange
4. Size: OD up to 5000mm
5. Pressure: 75bls to 2500bls
6. Marking: Require
7. Painting: yellow, black . oil and Zn
8. Inspection: in-house and the third party |
